CIE-H14A User Manual Ver. 1.4
- 21 -
2.2
Test operation
2.2.1
Modbus/TCP Test
This is for checking the operation of Input and output ports of CIE-H14A via Modbus/TCP.
In this instruction, Modbus/TCP test program was used.
Run ezManager. Then, you can see the window as shown below.
Figure 2-3 Modbus/TCP test program of the ezManager
① S
earch the connected CIE-H14A with [Search All] button.
②
Select a MAC address of searched product on the [search result].
③
Click the [Tools] - [Modbus/TCP] button.
④
The test program will appear on the right side of the ezManager
