21
20
outlets are completely free from dust, dirt or lint. If necessary, clean the appliance with a soft, dry
cloth.
4
The detangler prevents the power cord from twisting and tangling up while the hairdryer is in use.
V
USING THE COLD SHOT BUT TON
Use the cold shot button after drying and/or brushing your hair. To use the cold shot button:
1. Press the
cold shot button
7
to produce a cold air flow.
V
USING THE HAIR-STYLING NOZZLE
1. Switch off the appliance.
2. Let the appliance cool down.
3. Put the
hair-styling nozzle
1
onto the front of the appliance to attach the nozzle.
4. Use the appliance (see chapter
Using the hair dryer
).
5. Let the appliance cool down.
6. Remove the
hair-styling nozzle
1
from the appliance.
V
CLEANING AND C ARE
We recommend cleaning the appliance regularly. To clean the appliance:
1. Switch off the appliance.
2. Unplug the
power cable
2
from the power outlet.
3. Let the appliance cool down.
4. Clean the appliance with a slightly damp cloth.
5. Dry the appliance with a soft, dry cloth.
6. Rotate the
hair filter
4
to the right and remove it from the appliance.
7. Clean the
hair filter
4
with a brush.
6
Never replace the hair filter when it is wet under any circumstances.
6
Never use the appliance without the hair filter attached.
8. Place the
hair filter
4
back and rotate to the left to install it on the appliance.
V
TECHNIC AL SPECIFIC ATIONS
Model-No.
Type 381
Voltage
220–240 V~ / 50/60 Hz
Output
1900 - 2200 W
Technical changes reserved.
d
Snelstartgids
FAST DRY 360° ionic
Type 381
Een uitgebreide handleiding, antwoorden op veelgestelde vragen en recepten zijn te vinden op
www.solis.com/manuals
V
BEDOELD GEBRUIK
•
Dit apparaat is bedoeld om haar te drogen en te stijlen.
V
CONTENTS
Please check the contents of the package:
1x
FAST DRY 360° ionic
1x
Hair-styling nozzle
V
APPLIANCE DESCRIPTION (SEE IMAGE B)
1
Hair-styling nozzle
2
Power cable
3
Detangler
4
Hair filter
5
Control switches
6
Hanging eyelet
V
CONTROL SWITCHES (SEE IMAGE C)
7
Cold shot button
8
Heating level switch
9
ON/OFF and motor speed switch
V
BEFORE FIRST USE
1. Remove all packaging, stickers and labels.
V
INSTALL ATION
4
We recommend the installation of a residual current circuit-breaker to provide additional protection
when using electrical appliances. It is advisable to use a circuit-breaker with a nominal fault current of
maximum 30 mA. Your local electrician can advise you.
1. Plug the
power cable
2
into a power outlet.
V
USING THE HAIR DRYER
1. Set the
ON/OFF and motor speed switch
9
to the desired level. The appliance switches on.
2. Set the
heating level switch
8
to the desired level. The appliance produces a cold or hot air flow.
ON/OFF and motor speed switch Heating level switch
Appliance is switched off
0
Appliance is switched off
0
I
Appliance is switched off
0
II
Cold, motor runs slowly
I
Warm, motor runs slowly
I
I
Hot, motor runs slowly
I
II
Cold, motor runs fast
II
Warm, motor runs fast
II
I
Hot, motor runs fast
II
II
4
The appliance is equipped with a safety thermostat. The heating element automatically switches off
when the appliance overheats. The motor keeps running to cool down the heating element. After
a short break, the heating element switches back on automatically. Ensure that the air inlets and
