EN
WEATHER STATION
Solight TE84
Operating manual
Dear Valued Customer, thank you for purchasing our product. If you wish it to serve you safely and fully, please read these instructions carefully and follow
them. This will help you avoid improper use or damage to the product. Prevent unauthorized use of this device and always follow all rules concerning the
handling of electrical appliances. Keep the operating manual for future reference. The main unit should be located as close as possible to the window.
TECHNICAL SPECIFICATIONS
Main unit
Connect the device using a power adapter to power supply network. Open the back cover under the stand and insert
3x AAA 1.5V alkaline batteries. All LCD
segments will light up for a few seconds. You can pair the main unit with up to three sensors. Every sensor is powered by two AAA alkaline batteries. When
powered by power adapter, the weather station LCD is lit constantly. When powered by batteries, the LCD is lights up for five seconds after touching any button.
To reset the device, remove the batteries or disconnect the device from power supply for at least five seconds. This will cause all settings to be lost.
Default settings: 24-hour format, time indication 00:00, date 1 - 1 - 2004, temperature in °C
1 TOUCHSCREEEN BUTTON FUNCIONS
2 MAIN FUNCTIONS
Date and time (days of week
GE
FR
IT
DU
SP
DA
EN)
12 or 24-hour or 24-hour time format
Alarm with snooze function (5min)
Temperature measurement in °C or °F
Room temperature measurement
–
measuring range 0°C to +50°C, measuring ac/- 1°C
Room humidity measurement
–
measuring range 25% to 95%, measuring ac/- 5%
Outdoor temperature measurement
–
measuring range -30°C to +70°C, measuring ac/- 1°C
4 levels of weather forecast: clear sky, scattered clouds, overcast, rain
Possible pairing of up to three wireless sensors
Indication of low batteries in the main unit and in the wireless sensor
3 DEVICE FUNCTIONS AND FEATURES
3.1 Time setting
In the current time mode, press and hold the TIME button for more than two seconds. This will bring you to the time setting mode. The active segment will start
to blink. Setting order: year - time format - hours - minutes - year - month - day - language - leave setting mode. Push
UP
to move one step forward; push this
button for more than two seconds to move forward at an increased speed. Push
DOWN
to move one step backward; push this button for more than two
seconds to move backward at an increased speed.
To confirm your setting, press the TIME button.
If you don
’
t press any button for thirty
seconds, the values will be saved as you have set them.
Measuring room temperature
0°C to + 50°C
Measuring room humidity
25% to 95%
Measuring outdoor temperature
-30°C to +70°C
Power supply
AC/DC power adapter 4,5V/200mA;
3x AAA 1,5V alkaline battery (main
unit)
2x AAA 1,5V alkaline battery (sensor)
Accuracy of temp. measurement
1°C
Accuracy of hum. measurement
5%
Function
Control
TIME
AL
UP
DOWN
CH
SNZ
Standard
mode
Short
push
----
Toggling between
AL1 and AL2 setting
Switching
AL1, AL2
alarms on
°C/°F
switching
Toggling
between CH1,
CH2 and CH3
channels
Snooze function
Long push
Enter the time, date
and language setting
mode
Setting the various
alarms
-----
Pairing the
transmitter with
the receiver on
the current
channel
-----
Time setting
Short
push
Switch/confirm
settings
-----
One step
forward
One step
backward
-----
-----
Long push
-----
-----
Fast
forward
Fast
backward
-----
-----
Alarm clock
setting
Short
push
-----
Switch/confirm
One step
forward
One step
backward
-----
-----
Long push
-----
-----
Fast
forward
Fast
backward
-----
-----
To ensure correct LCD light intensity, we recommend the use of alkaline
batteries with a nominal voltage of 1.5V. Rechargeable NiMH batteries
typically supply 1.2V, and the LCD light intensity is therefore worse.