EN
Solight TE76 METEOROLOGICAL STATION
Instructions for use
Instructions for use
Dear customer, thank you for buying our product. If you would like to use it safely and get the most out of it then please read through these instructions carefully
and follow them. That way you will avoid incorrect use or damage. Prevent unauthorised use of this device and always respect all rules related to handling
electronic devices. Keep the instructions for use in case you need them later. The main unit should stand as close to a window as possible.
TECHNICAL INFORMATION
Main unit
In the case of charging using batteries open the battery cover and insert three AAA alkaline batteries. Observe the marked polarities. When switching on all
segments the LCD display will light up for a moment and the device will beep. Then it will go into standard mode of measuring temperature and humidity.
In the case of charging using a AC/DC adapter connect the charging connector to the input socket at the meteorological station and then connect to an electrical
socket.
Reset the equipment by removing the batteries or disconnecting the adapter for at least five seconds. That will return the settings to their defaults and will delete
the memory. In the case of charging using batteries the display lights up and stays lit for eight seconds each time. In the case of charging using an adapter it is lit
constantly.
You can only pair up the main unit with three sensors. Each sensor is charged by two AAA alkaline batteries.
Initial settings: 24-hour time format shows 00:00, pressure is in hPa units, and temperature is in °C
1. FUNCTIONS OF BUTTONS
2. MAIN FUNCTIONS
Date and time (days of the week in seven languages – English, German, French, Italian, Dutch, Spanish and Danish
12-hour or 24-hour time format
Two alarms
Alarm with SNOOZE function (interval adjustable from 3 to 20 minutes, default setting 5 minutes)
RCC signal reception mode: DCC
Measurement of temperature in °C or °F
Measurement of room temperature – range from 0°C - +50°C, accuracy of measu/- 1°C, scope of display (0°C to +50°C)
Room temperature
measurement
0°C to +50°
Room humidity measurement
25% to 95%
Outdoor temperature
measurement
-30°C to +60°C
Outdoor humidity measurement
25% to 95%
Power supply
3x AAA 1.5V alkaline battery
AC/DC adapter 5V/1,200mA
Temperature measurement
accuracy
1°C
Humidity measurement
accuracy
5%
Function
Control
MODE
ALARM
ALERTS
UP
DOWN
CHANNEL
SNOOZE/LIGHT
Standard
mode
Short
press
Switch between display
of time and alarms (AL)
Switch alarm on and off
Switch between
max/min
Switch
between
°C/°F
Switch
between
12h/24h
Switch between
CH 1, 2, 3
Switch between
under-lighting
modes
Long
press
Enter into time and
date setup mode
Delete information about
maximum/minimum
temperature/humidity
Enter into
temperature
alarm setup
function
Switch
barometer
HPa/inHg
Activate RCC
signal
reception
Pair transmitter
with receiver on
current channel
Enter into snooze
setup mode
Time setting
Short
press
Switch/Confirm setting
-----
-----
One step
forwards
One step
back
-----
-----
Long
press
-----
-----
-----
Forwards at a
speed of 8
steps per
second
Back at a
speed of 8
steps per
second
-----
-----
Alarm setting
Short
press
Switch/confirm setting
-----
-----
One step
forwards
One step
back
-----
-----
Long
press
-----
-----
-----
Forwards at a
speed of 8
steps per
second
Back at a
speed of 8
steps per
second
-----
-----
Set up
temperature
alarm
Short
press
-----
-----
Switch/confirm
setting
Switch
temperature
alarm on and
off
Switch
temperature
alarm on
and off
-----
-----
Long
press
-----
-----
-----
One step
forwards
One step
back
-----
-----
We recommend using alkaline batteries with a rated voltage of 1.5V for
the LCD display to be the correct luminescence. Rechargeable NiMH
batteries usually have a 1.2V rated voltage and the luminescence of the
LCD display is therefore worse.