4
4
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
TECHNOLOGY
Digital stereo line input to Mixer using USB and Digital Program
Out USB to PC for streaming
Analog MIC input using high performance EMI protected Opamps
with analog stereo PGM Out
Feedback controlled gain preamps: It never clips the audio signal
at any fader position
INPUTS
4 x MIC dynamic IN. Fader #3 has dual input preamp for MIC 3 +
Mic 4 // Level = -75 to -25 dBu
USB digital input from PC at fader # 4 (when not using USB it auto-
switches to Stereo Line)
Telephone Line to Hybrid – SIP internet lines can be used with ex-
ternal FXS adapter, non-included
Cellular Smartphone input using Bluetooth 4.0 (30-8.000 Hz full
range voice quality)
Stereo Line, switched between Telephone/Line or Fader #4 //
Level -10 / + 20 dBu
Insert In/Out for audio processor or external stereo devices //Le-
vel + 4 dBu
OUTPUTS
Stereo Program Output: Analog; unbal; +4dBu; Max. level +14dBu;
Z >5 KOhms
USB Digital Stereo Program Out to PC
MIC mixer Out for Recording at PC// -10 dBu /10k
4 x Headphones Out (16-32-600 ohms) // Level + 5 dBu/50 ohms
Muted speakers out (replaces Headphone #1)
12 V / 120ma LED Tally Light
Optional SmartCam USB out for Audicom & Close camera swi-
tching
INTERCOM
Internal MIC at MiniMixer. Communication with Studio, Hea-
dphones, Telephone and Cellphone for private phone attention.
Telephone keyboard for calling to phone lines without external
phone sets.
AUDIO PERFORMANCE
Frequency response MIC to PGM Out: 20 – 20.000 Hz +/- 1 dB
Plus anti-pop -3 dB @ 30 Hz
Frequency response USB to PGM out: 20 – 20.000 Hz +/- 1 dB
NOISE: MIC Equivalent input noise: – 120 dBA // Line input
S/N = 90 dBA
MIC COMPRESSOR: Compression range 0 – 20 dB // Attac
time = 5 mS // Release = 200 mS
DISTORTION : USB Line Input to USB PGM Out < 0,02 % THD at
1 KHz
Microphone at -50 dBu to analog PGM out < 0,1 % THD
PHONE HYBRID
Frequency response 300 – 3400 Hz +/- 1dB
Rejection: > 40 dB at 1 kHz with Null set at rear panel
Noise > 60 dBA S/N
POWER SUPPLY
External Switching 90–240 V 50/60 HZ 12V / 1A
INSERT EXTERNAL DEVICES
Rear connector for insertion at PGM out of audio processors or
external devices at + 4 dBu level. This insertion allows connec-
ting an external ASIO audio card USB for using at PC a VST
plug-ins for effects or multi band processing
DIMENSIONS AND WEIGHT
Wide= 274 mm
Deep= 270 mm
Front high= 25 mm
Rear High: = 71 mm
Weight = 1,6 Kg
MiniMIxer
broadcasting mixing console
Page 15
