U
SER
M
ANUAL
M
ARCH
2017
SolidRun Ltd
www.solid-run.com
Page 18 of 22
7 HaMada Street, Yokne’am Illit, Israel
10.5
O
PERATION
The product may be operated only under the operating conditions as specified by SolidRun.
When the product is used for an extended period of time, and/or at high ambient
temperature and/or exposed to direct sunlight it is normal for the product body to feel
warm.
CAUTION
Avoid overheating the product.
The product’s ventilation should not be obstructed or blocked. If proper ventilation is not
provided it can result in battery overheating or explosion of the battery resulting fire, burns
or other injuries.
CAUTION
Avoid overheating the product.
Operating the product in ambient temperature above its specifications may cause
overheating or explosion of the battery resulting fire, burns or other injuries.
DANGER
Stop using the product immediately if it emits smoke or a strange smell, or otherwise
behaves abnormally.
NOTICE
Following are the required operating position and conditions:
Do not place the product on unstable surfaces
Do not place the product on elevated surface and secure it from falling from high places on passerby
Do not place the product on heat-generating surface or near heat emitting devices or direct flame. Verify
that there is sufficient clearance between the product and any other device exhaust warm air
The product operating ambient range is temperature of 0-40 °C (32 to 104 °F) and Relative humidity of 10-
90%. SolidRun recommends that an ambient temperature of 20 to 25 °C (68 to 77 °F) and relative
humidity of 30-50% is maintained during normal operation as this will result in better performance and
longer life of the equipment. Temperature must not exceed the maximum temperature specified
above.
Do not expose the product to moisture or dust.
The product is not liquid-proof; therefore, the equipment must be protected against penetration by
liquids. If the necessary precautions are not taken, the user may suffer electric shock or the product
itself may be damaged, which can also lead to personal injury.
Never use the product under conditions in which condensation has formed or can form in or on the
product, e.g. if the product has been moved from a cold to a warm environment. Penetration by water
increases the risk of electric shock.
Summary of Contents for ClearFog PRO
Page 1: ...ClearFog PRO User Manual...
