U
SER
M
ANUAL
M
ARCH
2017
SolidRun Ltd
www.solid-run.com
Page 10 of 22
7 HaMada Street, Yokne’am Illit, Israel
Switch 1
Switch 2
Switch 3
Switch 4
Switch 5
SPI
Off
Off
Off
On
Off
SD/eMMC
Off
Off
On
On
On
M.2 SSD
On
On
On
Off
Off
UART
On
On
On
On
Off
Table 1 Boot Selection Table
For additional insights on operating system, please visit the
section of our
Additional extensive resources are available in the
5.4
M
ICRO
USB
CONNECTIVITY
(UART
TO MICRO
USB)
The ClearFog Pro Single Board Computer has an FTDI 230x UART to USB bridge allowing convenient
connection to the device console. This configuration is typically used by developers for debugging
purposes (e.g. kernel or drivers). Such serial console connection is of USB-to-UART type. The
connection speed should be set to 115200 bps. Further information is displayed on our wiki page with
tags #
& #
5.5
LED
S
There are multiple LEDs on the ClearFog Pro. These are indicating for example power on, connection
and port activity. For further details, please refer to our
Figure 5 Location of LEDS on the ClearFog
5.6
C
LOCK OPTIONS
For frequency configuration the ClearFog Pro utilizes a dip switch. The default setting is the off-
position for all 5 switches as in the picture here:
Summary of Contents for ClearFog PRO
Page 1: ...ClearFog PRO User Manual...
