Solidator 1.0, User Manual

Page: 6 / 19

6
Unpacking the Solidator :
1. Follow all unpackaging steps given in this video:
https://solidator.blob.core.windows.net/customers/SolidatorUnpackingInstructions.mp4
2. Move the box close to the table on which you plan to use the printer.
3.
Use two persons to remove the Solidator from the box, utilizing the grip holes as indicated in
the picture. Do
not tilt the printer, and watch the cover glass while moving the printer out!
4. Place the printer on the selected table.
IMPORTANT:
Use a water level to check the Solidator is leveled. If not already leveled, use the feet
on the Solidator, screwing in and out, to level the Solidator.