15
Upload Models
In order to upload models to the Solidator, there are 3 options: Ethernet, Wifi, or USB stick.
USB Stick
To upload files from an USB stick, save the sliced job file to the USB stick, Then, on the Solidator,
plug in the USB stick at the USB slot located in the font, nearby the touch screen. The LED in the
USB stick should light up. If not, the LED stick does not match the Solidator’s USB slot. Wait a few
seconds and click the Jobs/Files menu item to list all jobs. Then, copy a job over to the Solidator.
Later on, you can select the print in the print menu.
Network Setup
If you choose to use Network, you can also use the HTML5 Web Interface. You will be able to
access it using the IP address of the Solidator in your browser, e.g., http://192.168.0.100
Click the Setup Icon in the Main Menu, then select Wifi or LAN and enter the specifics of your
networks as usual.
Summary of Contents for 1.0
Page 1: ...SOLIDATOR DLP DESKTOP 3D PRINTER USER MANUAL ...
Page 17: ...17 ...
