Nucleus User Guide
Page 27
DAW Protocol Commands
To assign a HUI or MCU protocol function to a switch, select the relevant
Soft Key Set
in the Remote’s
DAW
tab
and click on the on-screen key that you wish to assign. The key will go yellow to indicate that it is being edited.
From the drop-down menu which appears, selecting
DAW CMDS
produces a second drop-down which lists all of
the functions and commands available to you within the selected Profile.
Note that the list shown below is for Pro Tools. See the Appendix for a full list of the commands available
for each supported DAW.
Select the required command from the list, and its name will appear in the appropriate part of the Browser’s soft key display.
Soft key assignments must be saved before they become active on Nucleus. If there are any unsaved changes when you try
to exit the current
Soft Key Set
, a pop-up will appear inviting you to save your changes before exiting. Click
No
to exit without
saving your changes, or
Yes
to save changes and return to the
Default
soft key set.
