Solid State Logic AWS DELTA 916 Owner'S Manual Download Page 115

Page: 115 / 239

DAW Control

HANNEL

SEL B

UTTON

– T

RACK

RMING

DIT

ELECT

The function of the channel

SEL

(

) button depends on the mode selected on the centre section

RDY

EDIT

and

SEL

keys on the Master Control Panel.

ECORD

EADY

ODE

RDY

is selected all 24 channel

SEL

buttons become Record Ready buttons. Pressing a channel

SEL

button puts the DAW track into Record Ready (provided that the DAW track has an input

routed). The

REC

tally above the meter flashes to show that the track is in ready.

EADY

Track arming can be set or cleared across all channels by using the master

RDY ALL

button. This

button flashes if any DAW tracks are in Record Ready. Pressing this switch while it is flashing will

clear all track arming.

ECORD

AFE

To put a DAW track into Record Safe (so it cannot be put in to Ready) hold down

ALT

and press

the channel

SEL

button. Hold down

ALT

OPTION

then press any

SEL

button to set all tracks

to Record Safe.

DIT

ODE

With

EDIT

mode selected the channel

SEL

button can have a number of functions:

This function will only work for the first 8 DAW channels in Pro Tools V6.4 and above.

Provided

BYPASS

(

) is off pressing one of the channel

SEL

buttons assigns the plug-in editor to that channel. The

EDIT

tally on that channel will light to confirm that this is the edit channel.

A double press on the

SEL

button will select the first plug-in in that channel for editing. Successive double presses will

select the next plug-in in that channel.
Selecting

BYPASS

(

) on the Master Control Panel changes the channel

SEL

buttons to Bypass buttons. Pressing a

channel

SEL

switch will bypass all plug-ins on that channel. The channel

EDIT

flag will light to show that all plug-ins are

bypassed.

AWS

elta

Owner’s Manual

Page 4-11

Summary of Contents for AWS DELTA 916
















































































































































































































































Search results

Summary of Contents for AWS DELTA 916

Reviews:

Solid State Logic AWS DELTA 916, Owner'S Manual, Page: 115 / 239

Search results

Summary of Contents for AWS DELTA 916

Reviews: