manualshive.com logo in svg

Solid Apollo Onyx 2 Zone In-Wall Wireless LED Dimmer, Product Manual

Share
Download
Solid Apollo Onyx 2 Zone In-Wall Wireless LED Dimmer Product Manual Download Page 1

 

 

Page 1

Product Description

Main Functions:

Receiver

Dimmer

PRODUCT MANUAL

Onyx 2 Zone In-Wall Wireless 

LED Dimmer and Receiver

On
yx 2 Z

one I

n-

W

all 

W

ireless LED Dimmer

The Onyx 2 Zone In-Wall Wireless LED Dimmer is an elegant wireless design with full wireless control for up to two LED zones. The dimmer is easy to 

install and fits in any standard US switch gang box. The wireless connection saves time and energy by requiring no cabling from the wall controller 

to the LED zones.

The Onyx 2 Zone includes a memory function, which remembers the last brightness setting even if the power goes out. The dimmer is the perfect 
controller for all single color LED projects and runs on low 12V to 24V power. The Onyx 2 Zone is easy to install and operate, and will provide many 

years of easy operation.

•   Control Up to 2 Zones Independently
•   Wireless Control for Quick and Easy Installation
•   Touch Sensitive Dark Glass Surface
•   50 Foot Wireless Range
•   Soft Touch On/Off
•   Memory Function - Remembers Last Setting 
     Even If Power Goes Off

This manual reviews:

Toll Free: 866.592.3873

Email: [email protected]

www.SolidApollo.com

•   Entire installation process
•   Product features and primary uses
•   Detailed functionality
•   Troubleshooting options
•   Technical Parameters

Summary of Contents for Onyx 2 Zone In-Wall Wireless LED Dimmer










Reviews:

No comments

Brands by name

Popular brands

Load more brands