Solgaz GNC-4, Assembly And Instruction Manual, Page: 4 / 21

4
1. GENERAL INFORMATION AND SAFETY INSTRUCTIONS
1.1. Purpose of the device
GNC type hobs are hobs for in-built installation, designed for preparation of dishes
and use in households. The gas burners are equipped
with temperature sensors, which assure maximum user safety and automatic, precise
operations. GNC belongs to a generation of gas hobs, whose burners are controlled
electronically and the device has
sensor-based control. The hob is designed for in-built installation in the countertop of a
single kitchen cabinet or in a composite countertop.
1.2. Technical specifications of the hob
Parameter Unit Value
Type and group of supplied
gas 2E 2Lw 2Ls 2L 3B/P 3P 3P
G20 G27 G2,350 G25 G30 G31 G31
Nominal connection
pressures mbar 20 20 13 25 37 37 30
Thermal power of all 4
burners kW 7.4
Gas stream of all 4 burners g/h ~740
(This value applies only to liquefied gases)
Power of individual burners
Large burner kW 2.8
Nozzle diameter mm 1.31 1.49 1.90 1.35 0.85 0.90 0.90
Medium burners kW 1.8
Nozzle diameter mm 1.05 1.25 1.49 1.05 0.70 0.75 0.79
Small burner kW 1.0
Nozzle diameter mm 0.79 0.90 1.05 0.85 0.50 0.55 0.57
Gas connection on the underside of the hob with an R1/2 internal pipe thread
Voltage and power supply 230 V/50 Hz -12V DC 4.5 A 60 VA
Protection rating IP40
Device class II
Hob dimensions
(W x D x H) mm 580 x 500 x 67 (the dimensions include the protruding cover for
engines), grid above the hob - 55
WARNING!
Please bear in mind that stepper motors placed under the hob's glass plate control the size of
the flame and may be audible during adjustments. When the burner is turned on and the gas
ignited, a regular sound (knocking) can be heard. These are normal phenomena
and sounds of a working hob.