1
3
7)
SWING
- To turn on oscillation, press the
SWING
button on the remote control when the unit is in air
conditioner mode, fan mode, and dehumidifier mode. The remote control will show an arrow ► by to
the “SWING” icon on the remote control LCD display. Once you press
SWING,
the louvers on the
unit will oscillate left and right.
OPERATING THE UNIT
Air Conditioner Mode
1) Install the exhaust hose and window kit properly (see pages 7 & 8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the
POWER
button.
4) Press the Mode button until the air conditioner mode icon lights up on the control panel display.
5) Press the ▲ or ▼ until the desired room temperature appears on the control panel display. The tem-
perature ranges from 64
°
F - 90
°
F ( 18
°
C - 32
°
C).
6) Select the desired fan speed by pressing the
FAN
button by using the Remote control.
NOTE:
During hot days, the unit will cool the room most efficiently by setting the temperature at the low-
est setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the ex-
haust hose and window kit, and keeping direct sunlight to a minimum will also improve the cool-
ing efficiency.
NOTE
:
When the unit is running on air conditioning mode, the exhaust hose is required and must be
vented outside using the supplied window kit.
Dehumidifier Mode
1) Install the exhaust hose and window kit properly (see pages 7 & 8 ).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the
POWER
Button.
4) Press the
MODE
button until the dehumidifier mode icon lights up on the control panel display.
NOTE:
The unit operates at low fan speed during dehumidifier mode. The unit cools room slightly dur-
ing the dehumidification process. Keep the windows and doors closed to aid the effectiveness of
the unit in removing the moisture from the room.
NOTE
:
When the unit is running on dehumidifier mode, the exhaust hose is required and must be
vented outside using the supplied window kit.
NOTE:
The unit will not perform in dehumidifier mode when the room temperature is lower than 61
°
F .
Fan Mode
1) Plug the Power Cord into an electrical outlet.
2) Turn on the unit by pressing the
POWER
button on the control panel.
3) Press the
MODE
button until the fan mode icon lights up on the control panel display.
4) Select the fan speed by pressing the FAN button.
NOTE:
It is not necessary for the exhaust hose and window kit to be installed to operate the unit in fan
mode.
Summary of Contents for TM-PAC-08E3
Page 8: ...8 WINDOW KIT INSTALLATION ...
