10
OPERATING INSTRUCTIONS
CONTROL PANEL BUTTONS
1)
Power On and Off
- Press the
POWER
button once to manually turn the unit on. Press the
POWER
button once more to turn the unit off.
2)
Mode Selection
- Press the
MODE
Button repeatedly to cycle between the different modes: Air
Conditioner mode, Dehumidifier mode, Fan only mode, and Auto mode. Each press of the MODE but-
ton will light up a different icon on the control panel. The exhaust hose and window kit must be in-
stalled when the unit is in Air Conditioner, Dehumidifier mode, and Auto mode. When using the unit as
a fan, it is not necessary to keep the exhaust hose and window kit connected to the unit.
3)
Temperature
- Select the desired temperature by pressing either ▲ or
▼ key when using the unit in
Air Conditioner mode. The temperature indicator flashes to display the desired temperature setting. Af-
ter the temperature is set, the unit will display this temperature setting until it is changed by the user.
The temperature indicator display shows temperature in Fahrenheit. Press and hold the Mode button for
20 seconds to switch between Celsius and Fahrenheit.
4)
Bucket Full
- When the unit cannot evaporate the collected moisture fast enough, the excess water
will collect in a backup water tank located inside the unit. The control panel will display “Ft” (Full
Tank)
if this occurs
.
5)
Louver Direction
- This unit has 4-way directional louvers. Use the louver guides manually to direct
air up and down. To direct air left and right, press the Auto-Swing Button for automatic comfort.
CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS
CONTROL PANEL
Airflow
Auto-Swing
Button
Mode Selection
Button
Decrease
Temperature
Button
Increase
Temperature
Button
POWER
ON/OFF
Button
Fan Mode
Button
Air Conditioner
Mode
Indicator
Dehumidifier
Mode
Indicator
Sleep Mode
Indicator
Fan Speed
Indicator
Fan Mode
Indicator
Auto
Mode
Indicator
Summary of Contents for TM-PAC-08E3
Page 8: ...8 WINDOW KIT INSTALLATION ...
