Soleus Air KFHHP-18, Manual

Page: 11 / 32

Sleep Function
keep running at this temperature.
¾
Under cooling or dehumidifying mode, the preset temperature will automatically rise by 1 one hour after setting of
ć
sleep function from remote controller and rise by another 1 after 2 hours.
ć
It totally rise 2 in 2 hours, and then will
preset temperature
set sleep function
T
preset
T
preset
T
preset
set sleep function
T
preset
T
preset
preset temperature
T
preset
¾
Under heating mode, the preset temperature will automatically decrease by 1 one hour after setting of sleep
ć
function from remote controller and decrease by another 1 after 2 hours.
ć
It totally decrease 2 in 2 hours, and then
will keep running at this temperature.
There is no sleep function under Fan and Auto mode.
Timer Function
The unit will automatically be turned on or off according to the timer set by the remote controller.
Memory Function
Contents of memory: Mode , Set fan speed, Set temperature, Swing.
If the system is de-energized under timer or sleep function, when re-energized ,the preset timer or sleep function will be
cancelled. you must reset it.
Indoor fan control
Indoor fan can be set to run at high, middle, low speed by remote controller, also can be set to AUTO FAN, in which
case, the indoor fan will select High, Middle and Low fan speed automatically according to the change of ambient
There may be about 3.5min delay for changing among the wind speeds.
temperature
Swing control
You can set the swing function by pressing the swing key on the remote controller only when the indoor fan is running.
After power on, the guide louver will be closed as shown in below fig. : 0 is close position, D is the min. position and L
is the max. positon.
If set swing function after turn on the unit, the guide louver will swing between D and L.
SOLEUSAIR