CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS
CONTROL PANEL & LED DISPLAY
CONTROL PANEL OPERATING INSTRUCTIONS
1)
Power On and Off
- Press the
POWER
button once to manually turn the unit on. Press the
POWER
button once more to turn the unit off.
2)
Mode Selection
- Press the
MODE
Button repeatedly to cycle between the different modes:
Cool, Dry
and Fan only mode. Each press of the
MODE
button will light up a different icon on
the control panel.
The exhaust hose and window kit must be installed when the unit is in
cool
or
dry mode.
When using the unit as a fan, it is not necessary to keep the exhaust hose and window
kit connected to
the unit.
3)
Temperature
- Select the desired temperature by pressing either “
- ”
or
“ + ”
key when using the unit in
cooling mode. The digital thermostat will display the set temperature.
4)
Louver Direction
- This unit has 4-Way directional louvers. Use the louver guides to direct air where
cooling or fanning is needed most.
5)
Bucket Full
-
When the unit cannot evaporate the collected moisture fast enough. The excess water will
collect in a backup water tank located inside the unit. The bucket full icon will light up if this occurs
REMOTE RECEIVER
MODE BUTTON
TEMP SELECT BUTTON
POWER BUTTON
8
BUCKET FULL LIGHT
COOL MODE LIGHT
DRY MODE LIGHT
FAN MODE LIGHT
LED DISPLAY
