SRVO
3
IMPORTANT
ELECTRICAL
INSTRUCTIONS
WARNING!
Route the power cord away from any moving part of the SRVO including transport wheels.
NEVER
remove any cover without first disconnecting AC power.
If voltage varies by ten percent (10%) or more, the performance of your SRVO may be
affected. Such conditions are not covered under your warranty. If you suspect the
voltage is low, contact your local power company or a licensed electrician for proper
testing.
NEVER
expose SRVO to rain or moisture. This product is NOT designed for use outdoors,
near a pool or spa, or in any other high humidity environment. The maximum operating
temperature specification is 40 degrees C, and humidity is 95% non-condensing (no water
drops forming on surfaces).
Circuit breakers:
Avoid AFCI/GFCI circuit breakers if possible. These breakers may trip
occasionally during exercise because of the high inrush currents of the SRVO drive
electronics and motor. This is an issue that affects all fitness equipment brands.
New laws in your area may require these breakers. If you do have these breakers and
outlets in your home, and are experiencing nuisance tripping, you should check if there
are any other devices plugged into the same circuit. Some examples of devices that may
also cause tripping are fluorescent lights with electronic ballasts, coffee maker, space
heater, hair drier. Optimally the treadmill should be the only device plugged into the
circuit.
Our SRVO have surge suppressors built in to help avoid nuisance tripping. We have tested
several AFCI/GFCI breakers and outlets with our products. Brands we have tested are:
Eaton (Cutler Hammer Series), Leviton (Smart lock pro) and Schneider Electric (Canadian
home series). These breakers do not trip in our testing, when connected to SRVO, as long
as no other devices are plugged into the same circuit.
GROUNDING
INSTRUCTIONS
This product must be grounded.
If SRVO should malfunction or breakdown, grounding
provides a path of least resistance for electric current, reducing the risk of electric shock.
This product is equipped with a cord having an equipment-grounding plug. The plug must
be plugged into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a
risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt
as to
whether the product is properly grounded. Do not modify the plug provided with the
product if it will not fit the outlet; have a proper outlet installed by a qualified
electrician.
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks
like the plug illustrated below. A temporary adapter that looks like the adapter illustrated
below may be used to connect this plug to a 2-pole receptacle as shown below if a
properly grounded outlet is not available. The temporary adapter should be used only until
