Dyaco Canada Inc. 2013
9
#112.
3/8” x 3-3/4” Hex
Head Bolt (4 pcs)
#113
. 3/8” x 3/4” Socket
Head Cap Bolt
(4 pcs)
#119.
M5 x 10mm
Phillips
Head Screw
(4 pcs)
#139
. 3/8” x 19mm x
1.5T
Flat Washer (4 pcs)
#142.
3/8” x2T Split
Washer (8 pcs)
#144
. 3/8” x 23 x 2T
Curved Washer (4 pcs)
ASSEMBLY INSTRUCTIONS
1
STABILIZERS
& CONSOLE
MAST
HARDWARE
STEP 1
1. Connect the Front Stabilizer Bar (
2
) with the Main Frame at the front joining
plate by using the Wrench (
151
) to tighten two Hex Head Bolts (
112
) , two
Split
Washers (
142
) and two Curved Washers (
144
).
2. Connect the Rear Stabilizer (
3
) with the Main Frame at the rear joining plate
by
using the Wrench (
151
) to tighten two Hex Head Bolts (
112
) , two Split
Washers
(
142
) and two Curved Washers (
144
).
3. Pull the wire, which is attached to the Computer Cable (
38
), out of Console
Mast
(
15
) and secure the mast on the Main Frame by using the M8 L Allen
Wrench
(
153
) to tighten four Socket Head Cap Bolts (
113
) together with four
Split
Washers (
142
) and four Flat Washers (
139
).
4. Plug in the connectors of the Computer Cable (
38
) and two Handpulse with
Cable Assemblies (White & Red) (
44
,
45
) on the back of the Console Assembly
(
35
) and secure the Console Assembly (
35
) on the console holding plate
with
four Phillips Head Screws (
119
) by tightening them with Phillips Head Screw
Driver (
150
).
ASSEMBLY
STEP 1