Sole Diesel 68 GTC, Operator'S Manual

Page: 3 / 82

Introduction
Solé, S.A. C-243 b, km 2 · 08760 Martorell (Barcelona) ·Tel. +34 93 775 14 00 · www.solediesel.com · info@solediesel.com 2
Operator’s Manual . Marine generator sets
Introduction
Presentation
Dear Customer,
First, we would like to thank you for choosing a Solé Diesel product. We recommend that you
read this manual carefully before carrying out any of the operations and keep it close at hand, near
the genset, as it can be of great use in the future.
Our goal as a manufacturing company is that you enjoy our product, regardless of the use you
make of it. The equipment manufactured in Solé Diesel facilities is designed to offer the highest
performance in the most demanding operating conditions.
The images, t ext and information contained in this manual are based on the product’s
features at the time of publication. Solé Diesel reserves the right to modify this document without prior
notice
Abbreviations
BTDC: Before Top Dead Center
ATDC: After Top Dead Center
BBDC: Before Bottom Dead Center
ABDC: After Bottom Dead Center
API: American Petroleum Institute
ACEA: European Automobile Manufacturers’ Association
ASTM: American Society for Testing Materials
TBD: To Be Determined
Units of measurement
Measurements are based on the International System of Units (SI), and their converted metric values
are indicated in parentheses (). For metric conversion, the following rates are used
-
Pressure: 1 Pa = 1,0197 · 10-5 kgf/cm
2
= 1 · 10
-5
bar
-
Torque: 1 Nm = 0,10197 kgf·m
-
Force: 1 N = 0,10197 kgf
-
Power: 1 W = 1,341 · 10
-3
HP