DriveMonitor screen example (ID-DCU-Industrial, SS)
Description:
1. Buttons to deactivate Fault and Horn reset.
2. Buttons to switch-over the engine operation modes OFF and RUN (in ID-DCU-Industrial).
3. Buttons for Start or Stop of the engine.
4. Engine operation state indication.
5. Engine timer indication.
6. LED indication for load or clutch – GREEN = On/Off load is Closed / Opened, see point 8.
7. LED indication of engine state: GREEN = Engine running, RED = event in Alarm List.
8. Button for Close / Open load or clutch (Binary output control).
9. Binary inputs list
10. Binary outputs list.
11. Alarm list
12. ECU Alarm list
13. Defined analog input bar graph – Oil press.
14. Undefined analog input.
15. ECU Alarm fault reset button.
16. Engine speed measurement.
17. Bar graph of battery voltage.
18. Connection indication.
19. Archive type indication.
20. DDE Server indication.
Hint:
More details of DriveMonitor software can be found in DriveMonitor User guide.
InteliDrive-DCU - Operator Guide, ©ComAp – January 2013
- 19 -
ID-Operator_guide_r2.pdf
1
11
12
16
17
2
3
4
5
9
10
13
14
15
18
19
20
6
7
8
