Sole Diesel 29 GS, Operator'S Manual

Page: 59 / 82

Solé, S.A. C-243 b, km 2 · 08760 Martorell (Barcelona) ·Tel. +34 93 775 14 00 · www.solediesel.com · info@solediesel.com 58
Marine Diesel gensets. Operator’s Manual.
Tightening torques
Section 8 – Tightening torques
Important nuts and bolts:
Cylinder head M12 x 1.75
Rocker cover M8 x 1.25
Crankshaft pulley M30 x 1.5
Bearing cap M14 x 2.0
Flywheel M12 x 1.25
M14 x 1.5
M20 x 1.5
Oil filter -
Oil relief valve M22 x 1.5
Injector (adjustment at M20 x 1.5
Glow plug M10 x 0.7
4T 7T
M6 x 1.0 2.94 to 4.90 (0.3 to 0.5) 7.85 to 9.8 (0.8 to 1.0)
M8 x 1.25 9.8 to 12.7 (1.0 to 1.3) 14.7 to 21.6 (1.5 to 2.2)
M10 x 1.25 17.7 to 24.5 (1.8 to 2.5) 29.4 to 41.2 (3.0 to 4.2)
M12 x 1.25 29.4 to 41.2 (3.0 to 4.2) 53.9 to 73.5 (5.5 to 7.5)
44.1 to 53.9 (4.5 to 5.5)
44.1 to 53.9 (4.5 to 5.5)
53.0 to 64.7 (5.4 to 6.6)
15.0 to 30.0 (1.5 to 3.0)
General tightening torque
480 to 500 (49 to 51)
98 to 108 (10.0 to 11.0)
78.5 to 88.5 (8.0 to 9.0)
Oil pan drain plug
34.0 to 44.0 (3.5 to 4.5)
73.0 to 83.0 (7.5 to 8.5)
10.0 to 13.0 (1.0 to 1.3)
TIGHTENING VALUES THREAD
29 GSC / 32 GSAC / 35 GTC / 40 GTAC / 45 GTC/ 54
GTAC/ 50 GTC/ 60 GTAC/ 68 GTC/ 84 GTAC
N · m (kgf · m)
113 to 123 (11.5 to 12.5)