Sole Diesel 100 GTA, Operator'S Manual

Page: 72 / 76

INSPECTION PRIOR TO THE DELIVERY OF PROPULSION ENGINES
72
Manual del Operador Grupos Electrógenos Marinos
Revisión 2. 10/2017
mm
mm
mm
YES YES
NO NO
V/x
V/x
Installation Date:
E-mail:
Email:
Installer Company:
Contact Tel. no.:
Name and surnames:
Contact Tel. no.:
Gearbox / Saildrive transmission ratio:
Propulsion Line Information
Propeller diameter: mm/inches Propeller pitch: mm/inches
INSPECTION PRIOR TO THE DELIVERY OF PROPULSION ENGINES
Installer / Marina information
Owner's Information
Ingine Information
Installation Information
Is the wet exhaust ebow above or below the floating line?
above below
Engine model:
Engine serial number:
Gearbox / Saildrive serial nº.:
Machine chamber operating temperature: ºC
Angle of the engine (boat moored): º
Has an exhaust collector been installed? Has an air trap been installed?
Int. Diameter of sea water intake to the
pump:
mm
Exhaus, Cooling and Fuel Line Information
Shaft diameter: Shaft length: mm
Electrical installation connections
Engine oil level
Gearbox oil level.
Coolant level and concentration
Control lever operation
Transmissions belts and belt tension
Verifications Prior to Start-Up Notes
Correct engine alignment.
Maximum angle of the engine (navigation conditions): º
Boat model:
Verify the instrument panel: normal indications and alarm
operation.
Water, oil and fuel leaks in the engine or transmission.
Bleed the fresh water cooling system
Verification of Engine No-Load Operations Notes
Unusual noises from the transmission
Oil pressure
Airtight sea water cock.
Nº. Of propeller
blades:
Int. Diameter of exhaust hose:
Int. Diameter of diesel intake:
Int. Diameter of diesel return intake: