Sole Diesel 100 GTA, Operator'S Manual, Page: 65 / 76

TECHNICAL APPENDICES
65
Manual del Operador Grupos Electrógenos Marinos
Revisión 2. 10/2017
In the following the steps for reading out the first blink code are shown:
a. The fault indicator lamp indicates a fault, e.g. it flashes of lights continuously.
Press diagnostics buttons 1 to 3: the flashing or continuous light of the fault indicator lamp
is extinguished.
b. After 2 s: recognition by the regulator (2×short flashes).
Output of the flashing sequence of the first stored fault.
(example: fault number 01, “speed sensor 1“):
-
After 2 s: 1×long
-
After 2 s: 1×short
After fault code output
-
5 s pause, then display of flashing or continuous light.
Steps for reading out the next fault:
a. The fault indicator lamp indicates a fault, e.g. it flashes of lights continuously.
Press diagnostics buttons 1 to 3: the flashing or continuous light of the fault indicator lamp
is extinguished
b. After 2 s: recognition by the regulator (2×short flashes).
The next blink code is output (c, d)
After fault code output
-
5 s pause, then display of flashing or continuous light.
The steps can be repeated until the last stored fault code is output. After that, the first fault code is
shown again.