Sole Diesel 100 GTA, Operator'S Manual

Page: 43 / 76

TROUBLESHOOTING
43
Manual del Operador Grupos Electrógenos Marinos
Revisión 2. 10/2017
GENSET FAILURE PROBABLE CAUSES RECOMMENDED ACTIONS SECTION
Oil pressure relief valve sticking 6.4
Oil pressure too low Check oil level. 6.4
Oil level too low
Restore the oil level. Inspect the genset for oil
leaks.
6.4
Faulty oil pressure valve Contact with our dealer -
Faulty oil pressure gauge or switch Check and/or replace oil pressure switch. 6.4
NOISY GENSET GENERAL
Compression weak Check the compression. 6.3
Overload Reduce the electrical load. 6.3
Exhaust system leak
Inspect the exhaust system. Replace the
inoperative exhaust system components.
6.3
Vibration excessive Tighten all loose nuts and bolts. 6.3
Valve clearance incorrect Adjust the valves. 6.3
OIL PRESSURE TOO HIGH LUBRICATION SYSTEM
Oil pressure relief valve sticking Contact with our dealer 6.4
Faulty oil pressure valve Contact with our dealer -
LOW POWER
GENERAL Valve clearance incorrect Contact with our dealer 6.3
FUEL SYSTEM
Fuel filter clogged Contact with our dealer 6.5
Fuel injectors dirty or faulty Contact with our dealer 6.5
Water in fuel system Contact with our dealer 6.5
Fuel injection timing out of adjustment Contact with our dealer 6.5
INLET AND EXHAUST
SYSTEM
Air filter clogged Replace air filter element. 6.7
Exhaust backfires
Inspect the exhaust system. Replace the
inoperative exhaust system components.
6.7
HIGH FUEL CONSUMPTION
GENERAL
Compression weak Check the compression. 6.3
Overload Reduce the electrical load. 6.3
Governor inoperative Contact with our dealer -
FUEL SYSTEM Fuel injection timing out of adjustment Adjust the fuel injection timing. 6.5