Chapter 4: Adding Active Directory Controllers and Users
often UDT updates its information about user activity within the
domain.
8. Click
Advanced Settings
under UDT Settings on the User Device Tracker
Settings page (
Settings > UDT Settings
).
9. Review and adjust as needed the AD User Update Interval to match the rate at
which AD user information is updated. This setting determines how often UDT
polls the AD domain controller for user information.
10. After the polling interval, review the user information available from this AD
domain controller in the All User Logins resource on the UDT Summary view.
Editing an AD domain controller
Follow these steps to edit a AD domain controller.To edit a domain controller:
1. Click
Manage Active Directory Administrator Credentials
in the UDT
Credentials area in UDT Settings (
Settings > UDT Settings
).
Select the AD domain controller in the list.
2. Click
Submit
.
Assign a credential to an AD domain controller
Follow these steps to assign a credential to an AD domain controller. To assign a
credential:
1. Click
Manage Active Directory Administrator Credentials
in the UDT
Credentials area in UDT Settings (
Settings > UDT Settings
) and select
one or more AD domain controllers in the list.
2. Click
Assign security log access credentials
and select the relevant
credential.
3. If you are ready to assign the credential to the selected node(s), click
OK.
Deleting an AD Domain Controller
Follow these steps to delete a domain controller.To delete a domain controller:
1. Click
Manage Active Directory Administrator Credentials
in the UDT
Credentials area in UDT Settings (
Settings > UDT Settings
).
Select one or more AD domain controllers in the list.
2. Click
Delete
.
51
