1. Click
Settings
near the top right of the application window.
2. Click
Discovery Central
in the Getting Started with Orion category.
3. Click
ADD A SINGLE DEVICE
.
4. Enter appropriate values in Define Node and then click Next.
a. In Hostname or IP Address, specify either value and
check Dynamic IP Address (if you intend to monitor
through SNMP), ICMP (if you want an up/down
indication through network ping), or External (NA for
SolarWinds UDT).
b. In SNMP Info, select the version, port, and enter the
correct read and read/write access string information.
5. Choose appropriate node resources to monitor.
6. Check Scan device for ports.
7. Based on the list of discovered ports, check the ones that you want UDT to
monitor.
8. Review the polling properties and adjust as needed. When you are ready,
click OK, ADD NODE.
Manage Nodes
Manage Nodes
is recommended to delete, edit, list resources, manage, and
unmanage a smaller number of devices across your enterprise.
To access
Manage Nodes
, click
Settings
near the top right of the application
window. Then click
Manage Nodes
in the Node and Group Management
category.
Click
Add a Node
in the Getting Started with Orion category to add a single
device to your enterprise.
User Device Tracker Port Discovery
When you have finished discovering network devices and importing them into the
Orion database, you must discover the Ethernet ports on those devices whose
connections you want SolarWinds UDT to monitor.
44
Manage Nodes
