background image

SAFETY, INSTALLATION, AND OPERATIONS MANUAL 

© The Solaria Corporation 

Contents subject to change without notice.

U.S. and International patents issued and pending  

Document PSC-0004 Rev 02, November 2010

2 of 12

 

Safety, Installation, and Operations Manual

  1.

  INTRODUCTION

This document provides safety, installation, and operations information for Solaria Photovoltaic 
Frameless modules 210, 220, and 230. 

 Read this document before installing, wiring, or using this product. Failure to comply with these 
instructions will invalidate the Solaria Limited Warranty and may cause loss, damage, and/or injury.

1.1. 

  LIMITED WARRANTY

The Solaria Corporation Limited Warranty for PV Modules is described in 

The Solaria Corporation 

Warranty Certificate Document.

  2.

  SAFETY 

 2.1.

  GENERAL SAFETY 

Solaria modules are qualified for Application Class A: Hazardous voltage (IEC 61730: higher than 50V 
DC; EN61730: higher than 120V), hazardous power applications (higher than 240W) where general 
contact access is anticipated (modules qualified for safety through EN IEC 61730-1 and -2 within this 
application class are considered to meet the requirements for Safety Class II).

Modules produce direct current (DC) when exposed to light. Direct current can arc across gaps and 
may cause injury or death if improper connection or disconnection is made, or if contact is made with 
exposed leads. 

OBSERVE THE FOLLOWING PRECAUTIONS TO MAINTAIN YOUR SAFETY

Before installing, wiring, or using modules, read all safety instructions in this document.

Follow all label instructions.

  Do not connect or disconnect modules when current from the modules or an external source is 

present. 

  Cover modules with an opaque sheet before making or breaking electrical connections.

  Do not expose modules to additional, artificially concentrated, high intensity sunlight.

  Use insulated tools to reduce the risk of electric shock. Do not touch terminals with your  

bare hands.

  Do not install or handle modules when they are wet or during periods of high wind.

  Do not stand on, drop, or allow objects to fall onto modules.

4-color

2-color

1-color

4-color

1-color

Summary of Contents for 210W













Reviews: