Page
1
of
2
SolarGoesGreen SGG-F156-3T
READ AND FOLLOW ALL INSTRUCTIONS BEFORE OPERATING YOUR SOLAR LIGHT.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
DESCRIPTION
The SolarGoesGreen solar SMD-LED flood light is the premier choice for outdoor solar lighting. The
versatility of the SolarGoesGreen SGG-F156-3T makes it the best choice for use in gardens, parks,
warehouses, garages, driveways, signs, yards, farms, horse riding arenas and businesses. The
SolarGoesGreen solar LED flood light is easily installed. The battery is protected by an auto-detection circuit
maximizing the brightness of the lamp and allowing the light to operate longer as the battery charge
declines.
PARTS
1 each 15W Solar Panel
1 each 156 SMD-LED Light Lamp
1 each waterproof 11.1V, 8Ah Lithium Ion Battery, attached to panel with aluminum alloy stock
1 each RF Wireless Remote Control and Timer
1 each Ground Stakes for Solar Panel
2 each Wall Mount for Solar Panel
Mounting Screws
INSTALLATION
1) INSTALLATION OF SOLAR PANEL
Mount the solar panel with unobstructed view to direct sunlight. For optimum performance, the solar panel must
face the southern horizon, positioned at a 45 degree angle using the ground mount stake or wall mount provided. For
ideal mounting of solar panel, the
Optional
SGG-PoleMT-301 Solar Panel Mount can be purchased from an authorized
retailer.
2) INSTALLATION OF LIGHT
Mount the light to customer supplied pole or fix it on the wall using mounting screws provided.
Connect lamp wire to battery connector.
Switch the power to ON position. Lamp will light up (flash on then off) and shut down after several seconds.
To test operation of unit, completely shield the face of solar panel by laying it face down on a flat surface or cover the
panel with thick black cloth. The Lamp will turn ON after several seconds.
After completing the above, the remote control functionality can now be used to manage the unit’s brightness and
working time independently. Please note
the remote control only operates light function when the switch is set to
the "ON" power position on light.
POWER SWITCH DESCRIPTION:
–
ON at night and charging during the day
.
O
–
Completely OFF
- no charging.
–
Only charging
.
REMOTE CONTROL
Dimmer and timer function.
Dimmer Options: 10%, 30%, 50%, 70%, 100%
Timer Options: 2 Hours, 4 Hours, 6 Hours, 8 Hours, 10 Hours
Press the corresponding button for desired working mode.
Selected working mode remains unchanged until new mode is selected or power switch is turned to off position.
If the light is turned OFF by remote control, lamp must be turned ON again by remote control or by resetting the
power switch to the OFF or Only charging position. Doing so returns the unit to Factory Default settings.
