SOLARFOCUS octoplus, Installation Manual

Page: 39 / 48

Initial commissioning
Installation manual octo
plus
39
7.7 Types of sensors - overview
Measuring
sleeve
Cable
Sensor type Art.No. Use
Colour Material / finish Length
15 cm silver Stainless steel braid
3 m PT100 69688
Flue gas temperature sensor (pellet
plus
, octo
plus
,
thermi
nator
I)
1.6 m PT100 69681 Flue gas temperature sensor (thermi
nator
II 22-30)
2.1 m PT100 69682
Flue gas temperature sensor (thermi
nator
II 36-60,
pellet
top
, pellet
plus
)
1 m PT100 69680 Feed sensor rotary valve (pellet
top
, octo
plus
)
13 cm grey PVC cable 2 m PT1000 1622 Flow sensor for fresh water module fast
5 cm
red Silicone cable 2.1 m PT100 69687 Feed sensor pellets / wood chips feed
red Silicone cable 3 m KTY81-110 69686
Return sensor, boiler temperature sensor, exter-
nal boiler sensor
black PVC cable 3 m KTY81-110 69095 Tank sensor
PVC cable 5 m PT1000 69095-1000 Tank sensor
black PVC cable 5 m PT1000 69098-1000 Flow sensor
Silicone cable 5 m KTY81-110 69689 Return sensor pellet
top
70
2 cm
grey PVC twin cable 2 m PT1000 1621-PT Tank sensor
white PVC twin cable 2 m KTY81-210/B 1621 Tank sensor
red Silicone cable 2 m KTY81-210/B 1620 Collector sensor
black Silicone cable 2 m PT1000 1620-PT Collector sensor
2 cm x 1.5 Ø
Contact sen-
sor
black PVC cable 2 m KTY81-110 69098 Flow sensor
- - to be provided on-site - KTY81-110 69096
Outside temperature sensor; (plastic housing
66x60x39 mm)
- - to be provided on-site - PT1000 69096-1000
Outside temperature sensor; (plastic housing
66x60x39 mm)
8
Initial commissioning

Initial commissioning of the boiler may only be performed by qualified personnel (SOLARFOCUS service
technician or SOLARFOCUS service partner) (= condition for guarantee / warranty)
Checklist for initial commissioning
Commissioning log for biomass systems, 
40
Network Scan function in boiler control
Output test boiler function
Output test heating circuit function
Further information on the functions listed can be found in the boiler operation manual.
Boiler-controlled room air flap - electrical connection
Fig. 8-1
When using a boiler-controlled room air
flap, select the
boiler operation parameter
for the Reserve relay parameter (the flap
opens when the burner is running).
Connect the room air flap on the boiler
power element to X6 (230 V AC).
The parameter
Reserve relay is located in the
Service menu > External boiler .
External boiler request
Time delay external boiler release
Reserve relay
External boiler Out
External boiler
Boiler operation