Single Inverter, Wireless Connection
The inverter is wirelessly connected to the monitoring platform via the Wireless
Gateway. The Wireless Gateway is connected to the home router via Ethernet. One or
two optional Repeaters extend the Wi-Fi range.
Figure 2: Single inverter, wireless connection
Multiple Inverters
Multiple devices, RS485 Master/ Slaves
Multiple inverters are connected in an RS485 bus. The master is connected wirelessly to
the Wireless Gateway. The Wireless Gateway is connected to the home router via
Ethernet. One or two optional Repeaters extend the Wi-Fi range.
Figure 3: Multiple inverters, wired connection
Multiple devices, Wi-Fi Point to Multi-point
This configuration enables connecting multiple devices wirelessly. The Wireless
Gateway is connected to the home router via Ethernet. Several inverters can be
connected to a single Wireless Gateway. One or two optional Repeaters can be used to
extend the Wi-Fi range.
Chapter 1: Overview
7
Wireless Gateway and Wireless Repeater Installation Guide MAN-01-00559-1.5
Summary of Contents for WIFI-GW
Page 29: ......