![SolarEdge StorEdge SE5000-xxS0 series Installation Manual Download Page 56](http://html1.mh-extra.com/html/solaredge/storedge-se5000-xxs0-series/storedge-se5000-xxs0-series_installation-manual_1313756056.webp)
P A N : X X X X X
C H : X X / X X X X
R S S I : < L >
M I D : X X X X X X
l
RSSI
: The receive signal strength indication of the closest ZigBee in the system. L = low, M = medium, H
= high and
(-) = no signal.
l
PAN ID
: The ZigBee transceiver PAN ID
l
Ch.
: The ZigBee transceiver channel
l
ID
: The ZigBee transceiver ID
l
MID
: The Master ID of the coordinator (master) ZigBee module. This field is shown only in devices with
router (slave) ZigBee modules, and after a successful ZigBee association. If a ZigBee module is not
connected, a
No ZigBee
message is displayed instead of the
MID
field.
Wi-Fi Status
This screen describes the Wi-Fi configuration:
I P : 1 9 2 . 1 6 8 . 2 . 1 1 9
G W : 1 9 2 . 1 6 8 . 2 . 1
S S I D : x x x x x x x x
R S S I : < L / M / H / - >
l
IP
: The DHCP provided address
l
GW
: The gateway IP address
l
SSID
: Service Set Identifier - the name of a wireless local area network (WLAN). All wireless devices on a
WLAN must employ the same SSID in order to communicate with each other.
l
RSSI
: The receive signal strength indication of the closest Wi-Fi in the SolarEdge system. L = low, M =
medium, H = high
and - = no signal.
GSM Status
If a GSM modem is connected, this screen replaces the Server status screen:
S e r v e r : C e l l < S _ O K >
S t a t u s : < O K >
M N O : < x x x x x x x > S i g : 5
< E r r o r m e s s a g e >
l
Server
: The method of communication to the SolarEdge monitoring portal. Should display
Cell
.
l
Status
: Displays OK if the inverter established a successful physical connection to the modem.
l
S_OK
: The last communication to the SolarEdge monitoring portal was successful (appears if the
inverter is connected to the portal). If S_OK is not displayed, refer to
Status Screens - Operational Mode
l
MNO
: The mobile network operator name
l
Sig
: The signal strength, received from the modem. A value between 0-5, (0 = no signal, 5 = excellent
signal).
l
Error message
per communication connection status failure.
Chapter 7: User Interface
SolarEdge
-
StorEdge
-Single
Battery/High
Capacity
Installation
MAN-01-00283-
1.1
55