Configuration Menu Options
Country and Grid
1. Select the
Country
option to specify the country in which the inverter is installed and the grid to
which it is connected. This parameter may arrive pre-configured. If so, verify that it is set to the
proper country.
WARNING!
The inverter must be configured to the proper country in order to ensure that it complies with the
country grid code and functions properly with that country grids.
A list of countries is displayed. If no country is configured, the value is <
NONE
>.
NOTE
If an inverter is not configured to any country, it will not produce energy, and the following
message will be displayed on the LCD:
No Country Selected
A plus sign (+) near the country indicates that another menu will be displayed after selection.
2. Confirm your country selection in the confirmation screen: Toggle to
YES
and press
Enter
.
Language
1. Select the
Language
option to set the language in which the LCD should display.
2. Confirm your language selection in the confirmation screen: Toggle to
YES
and press
Enter
.
Communication
1. Select the
Communication
option to define and configure:
l
The communication option used by the inverter to communicate with the SolarEdge
monitoring portal
l
The communication option used to communicate between multiple SolarEdge devices or
other external non-SolarEdge devices, such as electricity meters or loggers.
2. Select
Server
to set which communication method is used to communicate between devices and the
SolarEdge monitoring portal. Refer to for a full description of these communication options.
NOTE
The Server menu shows only the communication options installed in the inverter.
The following shows a hierarchical tree of the menu options in the
Communication
menu.
For detailed information about all the configuration options, refer to the
Communication
Options Application Note
, available on the SolarEdge website at
SolarEdge
StorEdge
-Single
Battery/High
Capacity
Installation
MAN-01-00283-
1.1
48
Configuration Menu Options
