StorEdge™ Wiring Guide & On Site Checklist for North America
Revision History
Version 1.4 (November 2018)
Added support of LG Chem batteries with the disconnect switch.
Added battery self-test.
Version 1.3 – support for connection of 2 LG batteries
Version 1.2 – menu and checklist updates
Version 1.1 – support for LG batteries
Version 1.0 – initial version, using Tesla batteries
This document is a battery wiring guide and contains an on-site checklist with steps for post-installation verification of a StorEdge system, for the following batteries:
LG Chem RESU10H
CAUTION
For proper battery performance, the LG Chem battery should remain connected to the StorEdge Inverter and in charging mode. Extended battery
disconnection may result in deep discharge and damage the battery.
For more details, refer to the StorEdge Installation Guide supplied with the StorEdge Inverter. For additional assistance contact SolarEdge Support
(refer to the section
Support and Contact Information
on page 13).