D e v i c e T y p e < S E >
P r o t o c o l < M >
D e v i c e I D < 1 >
S l a v e D e t e c t < # >
L o n g S L V D e t e c t < # >
S l a v e L i s t < # >
M u l t i - I n v . S e t
2. Select
Device Type
. the following screen is displayed:
S o l a r E d g e < M >
N o n - S E L o g g e r < S >
M u l t i D e v i c e s < M >
N o n e
3. Select
Multi Devices
. The following screen is displayed:
D e v i c e T y p e < M L T >
M e t e r 1 < S E , 1 >
M e t e r 2 < - - - >
M e t e r 3 < - - - >
4. Configure the parameters of the two meters as follows.
Make sure that the meter addresses (set in the previous
section) correspond with the device IDs and meter
functions in the setting below.
The settings provided herein are an example of a
Consumption meter set to address 1 and an Import
meter set to address 2.
Revenue Grade Energy Meter with Modbus Connection Installation Guide MAN-01-00609-1.0
60
Configuring the Dual-Meter Connection