Figure 22: 6-pin Terminal Block
2. Insert the terminal block into the
Control
connector on the firefighter gateway.
3. Verify that the SolarEdge gateway is connected to a power outlet.
4. Press the
Enter
button until the following message is displayed:
P l e a s e e n t e r
P a s s w o r d
* * * * * * * *
The gateway is now in Setup mode and all its LEDs are lit.
5. Use the three-right most LCD buttons to type in the following password:
12312312
.
The following menu is displayed:
L a n g u a g e < E n g >
C o m m u n i c a t i o n
R e m o t e S h u t d o w n
P o w e r C o n t r o l
D i s p l a y
M a i n t e n a n c e
I n f o r m a t i o n
6. Short-press the up/down buttons to scroll to the
Remote Shutdown
menu. Press
the Enter key to select it. The remote shutdown parameters are displayed:
Appendix B: Connecting Emergency Stop Button or Fire Alarm Control
52
Firefighter Gateway Installation Guide MAN-01-00113-1.4