SolarEdge Firefighter Gateway Installation Manual Download Page 43 | Manualshive

Page: 43 / 61

SolarEdge Firefighter Gateway Installation Manual Download Page 43

Wi-Fi

This communication option enables using a Wi-Fi connection for

connecting to the monitoring platform.

The Wi-Fi option requires a Wi-Fi Plug-in and an external antenna,

available from SolarEdge in a kit, which can be purchased separately and

assembled during system installation. The Wi-Fi Plug-in kit is provided

with a user manual, which should be reviewed prior to connection. Refer to

http://www.solaredge.com/sites/default/files/se_wifi_communication_solution_installation_

Cellular (GSM, CDMA)

This wireless communication option (purchased separately) enables

using a cellular connection to connect one or several devices (depending

on the data plan used) to the monitoring platform.

The GSM/CDMA Plug-in is provided with a user manual, which should be

reviewed prior to connection. Refer to

https://www.solaredge.com/sites/default/files/cellular_gsm_installation_

ZigBee

To mount the ZigBee Plug-in in the Firefighter Gateway, see "Mounting the ZigBee

Plug-in in the Firefighter Gateway" on page 48

Smart Energy Management - wireless connection to one or several
Smart Energy products, which automatically divert PV energy to

home appliances.

The Smart Energy products are provided with an installation guide,

which should be reviewed prior to connection. Refer to

https://www.solaredge.com/products/device-control#/

.

The ZigBee Plug-in for Smart Energy is provided with an installation

guide, which should be reviewed prior to connection. Refer to

https://www.solaredge.com/sites/default/files/se-device-control-zigbee-

module-installation-guide.pdf

To mount the ZigBee Plug-in in the Firefighter Gateway, see

Mounting the ZigBee

Plug-in in the Firefighter Gateway on page 48.

Firefighter Gateway Installation Guide MAN-01-00113-1.4

43

Communication Options

«
...
41
42
43
44
45
...
»

Summary of Contents for Firefighter Gateway






























































Reviews:

No comments