Display
Select Display to set the following:
L C D O n T i m e < 3 0 >
Temperature: Select Celsius or Fahrenheit units.
LCD On Time <30>: The number of seconds that the LCD backlight is ON after
pressing the LCD light button. Set a value within the range of 10-120 seconds.
TLM On Time <15>: The number of minutes that the LCD backlight is ON while
viewing the Telemetry window. Set a value within the range of 1-120 minutes.
Maintenance
Select Maintenance to set the following options:
D a t e a n d T i m e
F a c t o r y R e s e t
F W U p g r a d e
Date and Time: Set the internal real-time clock. If connected to the SolarEdge
monitoring platform, the date and time are set automatically and only time zone
should be set.
Factory Reset: Performs a general reset to the default device settings.
FW Upgrade: Perform a software upgrade by using an SD card. Refer
to
upgrading_an_inverter_using_micro_sd_card.pdf
.
Firefighter Gateway Installation Guide MAN-01-00113-1.4
37
Configuration Menu Options