RS485-X Conf:
D e v i c e T y p e < S E >
P r o t o c o l < M >
D e v i c e I D < 1 >
S l a v e D e t e c t < # >
C l u s t e r S L V D e t e c t
L o n g S l a v e D e t e c t < # >
S l a v e L i s t < # >
M u l t i - I n v . S e t
ZigBee Conf. (enabled only if the ZigBee internal card is connected):
D e v i c e T y p e < S E >
P r o t o c o l < M P S >
D e v i c e I D < 1 >
P A N I D
S c a n C h a n n e l
L o a d Z B D e f a u l t s
Wi-Fi Conf (enabled only if the internal card is connected):
S c a n N e t w o r k s
S e t k e y
L o a d D e f a u l t s
GPIO Conf:
D e v i c e T y p e < R R C R >
Power Control
Power control options are detailed in the
Power Control Application Note, available on
the SolarEdge website at
http://www.solaredge.com/files/pdfs/application_note_power_
.
Remote Shutdown
Select
Remote Shutdown
to set the following:
L 1 P o l a r i t y < N o r m . >
L 2 P o l a r i t y < N o r m . >
S a f e V d c < 1 2 0 V >
C l r A l a r m M o d e < M >
C l e a r A l a r m
For detailed information refer to
Connecting and Configuring an Emergency Stop
Button to the Gateway on page 51.
Chapter 4: LCD – Status Screens and Setup Options
36
Firefighter Gateway Installation Guide MAN-01-00113-1.4