The Firefighter Gateway is now in Setup mode and all its LEDs are lit. The Firefighter
Gateway automatically exits Setup mode if no buttons are pressed for more than 2
minutes.
3. Use the three-right-most LCD buttons to type in the following password:
12312312
.
The following message is displayed:
L a n g u a g e < E n g >
C o m m u n i c a t i o n
R e m o t e S h u t d o w n
P o w e r C o n t r o l
D i s p l a y
M a i n t e n a n c e
I n f o r m a t i o n
Language
1. Select the Language option to set the language in which the LCD should display.
2. Confirm your language selection in the confirmation screen: Toggle to YES and
press Enter.
Communication
1. Select the Communication option to define and configure:
The communication option used by the Firefighter Gatewayto communicate
with the SolarEdge monitoring platform
The communication option used to communicate between multiple SolarEdge
devices or other external non-SolarEdge devices, such as energy meters or
loggers.
NOTE
The Server menu shows only the communication options installed in the
Firefighter Gateway.
The following shows a hierarchical tree of the menu options in the
Communication
menu.
For detailed information about all the configuration options, refer to the
Communication Options Application Note, available on the SolarEdge
website at
http://www.solaredge.com/files/pdfs/solaredge-communication_
options_application_note_v2_250_and_above.pdf.
Chapter 4: LCD – Status Screens and Setup Options
34
Firefighter Gateway Installation Guide MAN-01-00113-1.4