SSID: Service Set Identifier - the name of a wireless local area network (WLAN). All
wireless devices on a WLAN must employ the same SSID in order to communicate
with each other.
RSSI: The receive signal strength indication of the closest Wi-Fi in the SolarEdge
system. L = low, M = medium, H = high and - = no signal.
GSM Status
If a GSM Plug-in is connected, this screen replaces the Server status screen:
S e r v e r : C e l l < S _ O K >
S t a t u s : < O K >
M N O : < x x x x x x x > S i g : 5
< E r r o r m e s s a g e >
Server
: The method of communication to the SolarEdge monitoring platform.
Should display
Cell
.
Status
: Displays OK if the inverter established a successful physical connection to
the modem.
S_OK
: The last communication to the SolarEdge monitoring platform was successful
(appears if the inverter is connected to the platform). If S_OK is not displayed, refer
to
Status Screens - Operational Mode on page 29.
MNO
: The mobile network operator name
Sig
: The signal strength, received from the modem. A value between 0-5, (0 = no
signal; 5 = excellent signal)
Error message
: per communication connection status failure
Communication Ports Status
This screen presents the communication port (RS485-1/2 or ZigBee), and the devices
connected to them, with details about the number, type, and protocol.
D e v P r o t # #
R S 4 8 5 - 1 < S E > < S > < - - >
R S 4 8 5 - 2 < S E > < S > < - - >
Z i g B e e < S E > < M P S > < - - >
Chapter 4: LCD – Status Screens and Setup Options
32
Firefighter Gateway Installation Guide MAN-01-00113-1.4