91
UPS for 400 Vac Grid, User Guide, doc. rev. 4
In this screen you indicate the alarms that you want to be included in the emails to the current
recipient.
Buttons appearing at the bottom of the screen (Figure 77) control which alarms are listed on
the screen: “All”, or only those alarms with an “Information”, “Warning”, or “Critical” severity.
From the alarms displayed, indicate the ones you want to go to the recipient by selecting the
appropriate alarm checkbox.
10.
Select Confirm.
The appropriate alarm is sent to the recipient when the UPS alarm is triggered.
8.2.6.7.
Controller host name
Use this option to specify a name for the controller. The network manager will see this name. In
the event of any network-related problems he will be able to identify the device in question.
This is especially useful when there is more than one UPS connected to the network. If you give
each UPS a unique name, the network manager will be able to distinguish between them. This can
be helpful in the event of any network-related problems.
8.2.7.
Setup > Time
Figure 78: Setup, Time menu options
