61
UPS for 400 Vac Grid, User Guide, doc. rev. 4
8.2.3.2.
Setup > Battery > Battery current
The parameters in this section relate to the battery output current.
Figure 44: Setup, Battery, Battery Current
8.2.3.2.1.
Enable/Disable current sensors
Use this function to enable or disable the battery current sensors. The UPS has a built-in internal
current sensor.
Figure 45: Enable/Disable Current Sensors
8.2.3.2.2.
Set battery current limit value
Use this function to set a limit for the battery maximum charging rate..
