31
UPS for 400 Vac Grid, User Guide, doc. rev. 4
6.2.5.
Log menu
Select the Log icon on the System menu to view the system log. The system log lists all of the
important system events that have occurred since the last time the log was initialized.
Figure 12: Log option
Events listed include system power-up and power-down and the start and end of all alarm
conditions.
For a full description of the Log option, see Section 8.6.
6.3.
Operating the UPS
From the System menu, the Operation option is used to perform the following:
1.
Turn on UPS (System on)
2.
Turn off UPS (System off)
3.
Turn off power modules
4.
Turn on power modules
5.
Transfer the load to bypass
6.
Transfer the load to inverter
7.
Test battery
8.
ECO mode
For full details see section 8.3.
6.3.1.
Turn on UPS
Verify that the circuit breaker is in the ON position.