SolarEdge 3000A-US, Installation Manual, Page: 20 / 71

Chapter 3: Installing the Inverter
SolarEdge Installation Guide – MAN-01-00002-1.7
18
Chapter 3: Installing the Inverter
The inverter can be installed either before or after the modules and power optimizers have been installed.
CAUTION:
Do not rest the connectors at the bottom of the inverter on the ground, as it may damage them. To
rest the inverter on the ground, lay it on its back, front or side.
A aucun moment ne posez les connecteurs inférieurs de l'onduleur sur le sol de peur de les
endommager. Si vous avez besoin de poser l'onduleur sur le sol, couchez le sur son dos, sur sa
face ou son coté, pas sur sa base.
NOTE:
Use only copper conductors rated for a minimum of 90
°
C.
Inverter Transport and Storage
Transport the inverter in its original packaging, facing up and without exposing it to unnecessary shocks. If
the original package is no longer available, use a similar box which can withstand the weight of the
inverter (refer to the inverter weight in
Appendix B: Technical Specifications on page 60), has a handle
system and can be closed fully.
Store the inverter in a dry place where ambient temperatures are -25°C - +60°C / -13°F - 149°F.
Inverter Package Contents

One SolarEdge inverter

One mounting bracket

Two flat head screws for fastening the inverter to the mounting bracket

This installation guide

Quick installation guide

Inverter activation instructions (may include SD card)

Universal PV connector unlocking tool
Identifying the Inverter
Refer to the sticker on the inverter that specifies its Serial Number and its Electrical Ratings . Provide the
serial number when contacting SolarEdge support. The serial number is also required when opening a new
site in the SolarEdge monitoring portal.