Center and glue the spinner surface assembly to the tower
cap. Be generous with the glue to firmly secure it.
2.8
Remove the
4x bottom railings (8)
and
remove cutouts. Add glue to the
indicated areas and slot the railings into
the notches on the large platform. We
need to keep the public on the viewing
platform safe!
2.9
Remove the
4x top railing (9)
and
remove cutouts. Add glue to the
indicated areas and slot the railings into
the notches on the small platform.
2.10
ASSEMBLY STEPS
Find the
spinner surface
and place it face down (dome up) on a hard work surface.
Take the
spinner ring (7)
and push it onto the spinner surface so it “force fits” into
the spinner ring, so the edge of the spinner surface is flush with the ring.
3. Assembling
Step
the Counter Balance
3.1
Remove the
balance base (10)
and
remove cutouts. Cut the double sided
sticky tape (DSST) in half and use one
piece to stick the SolarEngine to the base
of the counterbalance power station
where shown. Make sure the wiring
orientation matches the illustration.
dome
side up
press ring
down onto
dome...
...flip over!
2.7
The Paris Flyer CarouSol Kit
7