Remove the
small platform (4)
and remove cutouts. Add glue to the indicated areas
and push the small platform down onto the fingers of the tower middle section.
2.4
Remove the
4 x tower top parts (5)
and
remove cutouts. Add glue to the indicated
areas and fit each edge together to create
the three-dimensional tower top.
Add glue to the indicated areas and
push the assembled top tower into the
holes on the small platform.
2.5
ASSEMBLY STEPS
Install the assembled middle tower into
the holes on the large platform.
Remove the
tower cap (6)
and remove any cutouts. Add
glue to the indicated areas and push the tower cap onto the
fingers of the tower tops.
2.6
2.3 cont’d
The Paris Flyer CarouSol Kit
6
You may need
to spread &
wiggle the
tower base
fingers to get
the fingers into
the holes of the
large platform.