Remove the
2 x small railing (14),
medium railing (15),
and
2 x large
railing (16)
and remove cutouts. Add
glue and slot the railings into the
notches on the balance base.
3.6
Remove the
4 x large slot isolators (17)
and remove cutouts. Add glue, and slide
the isolators onto the power station
towers.
3.7
Remove the
4 x small slot isolators (18)
and remove cutouts. Add glue to the
indicated areas and slide the isolators
onto the balance towers.
3.8
Remove the
balance arm (19)
and
mounting pin tab (20)
and remove
cutouts. Slot the balance arm between the
two balance holders and slide the
mounting pin tab into the hole so it goes
through all three pieces.
3.9
Pre-assemble the
rotation point
and
screw
and slide it to the balance arm
assembly so the point sits in the middle of
the three pieces. Best to snug up the
screw during insertion, and force-slide it
the rest of the way.
3.10
ASSEMBLY STEPS
The Paris Flyer CarouSol Kit
9