Solarbotics Squid Hunting, Manual, Page: 11 / 16

4.5
Locate the magnet holder (23) and
the magnet . Position the magnet into the
circular cutout and slide the magnet
holder up and around it, trapping it in
place.
10
4.6
Cut four 3mm (1/8”) wide strips
from the double sided sticky tape . Peel
the protective paper off and mount the
solar panels to the panel holders.
Hide any extra wire in behind the panels.
4.7
With the sub and balance arm
complete, complete the “main
characters” assembly by slotting the
assembled squid into the slot at the
bottom of the balance arm.
ASSEMBLY STEPS