Steps 13, 14, 15
The ATMega8L Brainboard
2
Step 13 - I C Header:
Going to interface to other I C peripherals? You’ll need
to install this header. Make sure the big flat tab is nearest the top of the PCB,
2
where the long line is shown on the symbol. Install it in the position marked
I C
Port
.
Step 14 - SP-12 Header:
If you’re
planning on using a build-it-yourself
parallel-port programmer, you’ll
need to install the 5-socket header
at location
SP-12.
Step 15 - 10 Pin ISP Header:
The
10-pin ISP (”In Circuit
Programming”) header interfaces
with most popular Atmel
programming tools. Install it in
position
10 Pin ISP
.
Step 13:
2
I C Port
Step 14:
SP-12
Step 15:
10 Pin ISP
(2 rows
of 5 pins)
2
I C Header:
Note tab position!
You’re almost done. With the exception of the expansion sockets (later), you’re
done on the top-side. Let’s flip the PCB over, and work entirely on the other
side to install the mounting pins.
Completed all the
necessary topside component
soldering!
2